Copier Techs [ return ]
FromMessage
John

 Email

9/14/2009
14:27:07
Subject: Ricoh 3045
IP: Logged

Message:
Does error code SC450 mean dev motor locked, if so how do i unlock it? If not what does it mean?
Thanks
John


ricoh dude

 Email

9/14/2009
17:23:08
RE: Ricoh 3045
IP: Logged

Message:
Feed Development Motor Error
The PLL lock signal remained HIGH
while the feed development motor was
off, and when the motor was turned on,
the signal remained LOW for 2 sec.
Motor lock caused by physical
overload.
Motor drive board (PCB) defective.
Turning the main switch off then on resets SCs
displayed on the operation panel. These are redisplayed
if the error occurs again.
Turn the operation switch off
and on.



ricoh_geek

 Email

9/16/2009
11:39:44
RE: Ricoh 3045
IP: Logged

Message:
have u done a complete transfer service ie... empty change blade and belt


P 1
Bulletin Boards Page Email Smarka! Home Page

(C) Smarka Inc. All rights reserved.